If you encountered any problems with the installation of BigBlueButton, this section covers how to resolve many of the common issues.

    If you have not already done so, read through the getting help section.


    Start here: run sudo bbb-conf --check

    We’ve built in a BigBlueButton configuration utility, called bbb-conf, to help you configure your BigBlueButton server and troubleshoot your setup if something doesn’t work right.

    If you think something isn’t working correctly, the first step is enter the following command.

    $ sudo bbb-conf --check

    This will check your setup to ensure the correct processes are running, the BigBlueButton components have correctly started, and look for common configuration problems that might prevent BigBlueButton from working properly.

    If you see text after the line ** Potential problems described below **, then it may be warnings (which you can ignore if you’ve change settings) or errors with the setup.


    Recording not processing after upgrading

    If after updating from BigBlueButton 2.0 to BigBlueButton 2.2 your recordings are not processing, and if you are seeing Permission denied errors in /var/log/bigbluebutton/bbb-rap-worker.log

    I, [2019-06-07T14:26:09.034878 #14808]  INFO -- : /usr/lib/ruby/2.5.0/logger.rb:754:in `initialize': Permission denied @ rb_sysopen - /var/log/bigbluebutton/presentation/process-02feca80700b3e95b877af85db972904397857a1-1559909318977.log (Errno::EACCES)

    You can resolve the errors with the following command

    $ sudo chown -hR bigbluebutton:bigbluebutton /var/log/bigbluebutton/presentation /var/log/bigbluebutton/screenshare

    and then rebuild the recordings that had not yet processed. You can see the list of recordings with

    $ bbb-record --list

    and then to rebuild a recording, use sudo bbb-record --rebuild <internal_meeting_id>, as in

    $ sudo bbb-record --rebuild 298b06603719217df51c5d030b6e9417cc036476-1559314745219


    WebRTC video not working with Kurento

    Check the value for /proc/sys/net/ipv4/tcp_syncookies that it contains the value 1.

    $ cat /proc/sys/net/ipv4/tcp_syncookies

    If not, edit /etc/sysctl.conf and set the value for net.ipv4.tcp_syncookies to 1.

    net.ipv4.tcp_syncookies = 1

    Save the file and restart.

    Unit kurento-media-server.service is masked

    If sudo bbb-conf --check returns the warning

    Restarting BigBlueButton 2.0.0-RC9 (and cleaning out all log files) ...
    Stopping BigBlueButton
     ... cleaning log files
    Starting BigBlueButton
    Failed to start kurento-media-server.service: Unit kurento-media-server.service is masked.

    You can unmask Kurento using the command

    $ systemctl unmask kurento-media-server.service

    Unable to share webcam

    The default installation of BigBlueButton should work in most netowrk configurations; however, if your users ae behind a restrictive network that blocks outgoing UDP connections, they may encounter 1020 errors (media unable to reach server).

    If you get reports of these errors, setup TURN server to help their browsers send WebRTC audio and video streams via TCP over port 443 to the TURN server. The TURN server will then relay the media to your BigBlueButton server.

    See Configure TURN.


    Configure BigBluebutton/FreeSWITCH to support IPV6

    The HTML5 client now enables users on mobile devices to connect to a BigBlueButton server. However, on some cellular networks iOS devices only receive an IPV6 address.

    To enable BigBlueButton (FreeSWITCH) to accept incoming web socket connections on IPV6, the BigBlueButton server must have an IPV6 address. You also need to make the following changes to the server.

    First, create the file /etc/nginx/conf.d/bigbluebutton_sip_addr_map.conf with this content:

    map $remote_addr $freeswitch_addr {
        "~:"    [2001:db8::1];

    replacing the ip addresses with the system’s external IPV4 addresses, and replace 2001:db8::1 with the system’s external IPV6 address. Next, edit the file /etc/bigbluebutton/nginx/sip.nginx to have the following:

    proxy_pass https://$freeswitch_addr:7443;

    Next, ensure all of the following params are present in freeswitch’s sip_profiles/external-ipv6.xml:

    • ws-binding
    • wss-binding
    • rtcp-audio-interval-msec
    • rtcp-video-interval-msec
    • dtmf-type
    • liberal-dtmf
    • enable-3pcc

    If any are missing, copy them from sip_profiles/external.xml, then restart BigBlueButton (sudo bbb-conf --restart).

    FreeSWITCH fails to bind to IPV4

    In rare occasions after shutdown/restart, the FreeSWITCH database can get corrupted. This will cause FreeSWITCH to have problems binding to IPV4 address (you may see error 1006 when users try to connect).

    To check, look in /opt/freeswitch/var/log/freeswitch/freeswitch.log for errors related to loading the database.

    2018-10-25 11:05:11.444727 [ERR] switch_core_db.c:108 SQL ERR [unsupported file format]
    2018-10-25 11:05:11.444737 [ERR] switch_core_db.c:223 SQL ERR [unsupported file format]
    2018-10-25 11:05:11.444759 [NOTICE] sofia.c:5949 Started Profile internal-ipv6 [sofia_reg_internal-ipv6]
    2018-10-25 11:05:11.444767 [CRIT] switch_core_sqldb.c:508 Failure to connect to CORE_DB sofia_reg_external!
    2018-10-25 11:05:11.444772 [CRIT] sofia.c:3049 Cannot Open SQL Database [external]!

    If you see these errors, clear the FreeSWITCH database (BigBlueButton doesn’t use the database and FreeSWITCH will recreate it on startup).

    $ sudo systemctl stop freeswitch
    $ rm -rf /opt/freeswitch/var/lib/freeswitch/db/*
    $ sudo systemctl start freeswitch

    Forward calls from an Asterisk server to FreeSWITCH

    Let’s assume the following:

    asterisk server ip:
    bigbluebutton/freeswitch ip:

    Changes to your Asterisk server

    Setup your gateway to BigBlueButton/FreeSWITCH. in /etc/asterisk/sip.conf add


    Route the calls to the gateway. In /etc/asterisk/extensions.conf context where your calls are being handled, forward the calls to the gateway. Here, when someone dials 85001, the call is sent to the fs-gw defined above.

    exten => 85001,1,Dial(SIP/fs-gw/${EXTEN})
    exten => 85001,2,Hangup

    Changes to your BigBlueButton/FreeSWITCH server

    In BigBlueButton/FreeSWITCH, make the following changes:

    Lock down so that only Asterisk can forward calls to FreeSWITCH. In /opt/freeswitch/conf/autoload_configs/acl.conf.xml, add the following ACL. We also need to allow BigBlueButton to call into FreeSWITCH, that’s why we add the IP of BigBlueButton/FreeSWITCH into the ACL.

        <list name="asterisk-gw" default="deny">
           <node type="allow" cidr=""/>
           <node type="allow" cidr=""/>
           <node type="allow" cidr=""/>

    Then we apply the ACL into the profile that receives the calls from external gateways. In /opt/freeswitch/conf/sip_profiles/external.xml, add the ACL under <settings>

        <!-- Apply ACL from asterisk-gw -->
        <param name="apply-inbound-acl" value="asterisk-gw"/>

    To debug, try connecting to FS CLI and increase logging level. Once connected, make your call and see what the logs say.

    $ /opt/freeswitch/bin/fs_cli -p $(xmlstarlet sel -t -m 'configuration/settings/param[@name="password"]' -v @value /opt/freeswitch/etc/freeswitch/autoload_configs/event_socket.conf.xml)
      Once connected:
      help -- shows the available commands
      console loglevel <level> -- change log level
      Ctrl-D to exit

    FreeSWITCH fails to bind to port 8021

    FreeSWITCH supports both IPV4 and IPV6. However, if your server does not support IPV6, FreeSWITCH will be unable to bind to port 8021. If you run sudo bbb-conf --check and see the following error

    # Error: Found text in freeswitch.log:
    #    Thread ended for mod_event_socket
    # FreeSWITCH may not be responding to requests on port 8021 (event socket layer)
    # and users may have errors joining audio.

    it might be that your server has IPV6 disabled (or does not support it). You can check this by running the following command

    $ sudo ip addr | grep inet6
    inet6 ::1/128 scope host

    If you do not see the line inet6 ::1/128 scope host, then your server has IPV6 disabled. In this case, we need to disable FreeSWITCH’s support for IPV6. First, edit /opt/freeswitch/etc/freeswitch/autoload_configs/event_socket.conf.xml and change the line

        <param name="listen-ip" value="::"/>


        <param name="listen-ip" value=""/>

    This tells FreeSWITCH that instead of binding port 8021 to the local IPV6 address, bind to the IPV4 address Next, execute the following two commands

    $ sudo mv /opt/freeswitch/etc/freeswitch/sip_profiles/internal-ipv6.xml /opt/freeswitch/etc/freeswitch/sip_profiles/internal-ipv6.xml_
    $ sudo mv /opt/freeswitch/etc/freeswitch/sip_profiles/external-ipv6.xml /opt/freeswitch/etc/freeswitch/sip_profiles/external-ipv6.xml_

    and then restart BigBlueButton with the commands

    $ sudo bbb-conf --clean
    $ sudo bbb-conf --check

    FreeSWITCH fails to start with a SETSCHEDULER error

    When running in a container (like a chroot, OpenVZ or LXC), it might not be possible for FreeSWITCH to set its CPU priority to real-time round robin. If not, it will result in lower performance compared to a non-virtualized installation.

    If you running BigBlueButton in a container and an error starting FreeSWITCH, try running systemctl status freeswitch.service and see if you see the error related to SETSCHEDULER

    $ systemctl status freeswitch.service
    ● freeswitch.service - freeswitch
       Loaded: loaded (/lib/systemd/system/freeswitch.service; enabled; vendor preset: enabled)
       Active: inactive (dead) (Result: exit-code) since Mon 2017-10-02 16:17:29 UTC; 18s ago
      Process: 10967 ExecStart=/opt/freeswitch/bin/freeswitch -u freeswitch -g daemon -ncwait $DAEMON_OPTS (code=exited, status=214/SETSCHEDULER)
     Main PID: 3327 (code=exited, status=0/SUCCESS)
    Oct 02 16:17:29 scw-9e2305 systemd[1]: Failed to start freeswitch.
    Oct 02 16:17:29 scw-9e2305 systemd[1]: freeswitch.service: Unit entered failed state.
    Oct 02 16:17:29 scw-9e2305 systemd[1]: freeswitch.service: Failed with result 'exit-code'.
    Oct 02 16:17:29 scw-9e2305 systemd[1]: freeswitch.service: Service hold-off time over, scheduling restart.
    Oct 02 16:17:29 scw-9e2305 systemd[1]: Stopped freeswitch.
    Oct 02 16:17:29 scw-9e2305 systemd[1]: freeswitch.service: Start request repeated too quickly.
    Oct 02 16:17:29 scw-9e2305 systemd[1]: Failed to start freeswitch.

    If you see SETSCHEDULER in the error message, edit /lib/systemd/system/freeswitch.service and comment out the line containing CPUSchedulingPolicy=rr (round robin)


    Save the file, run systemctl daemon-reload, and then restart BigBlueButton. FreeSWITCH should now startup without error.

    Users not able to join Listen Only mode

    When doing sudo bbb-conf --check, you may see the warning

    voice Application failed to register with sip server

    This error occurs when bbb-apps-sip isn’t able to make a SIP call to FreeSWITCH. You’ll see this in BigBlueButton when users click the headset icon and don’t join the voice conference.

    One possible cause for this is you have just installed BigBlueButton, but not restarted it. The packages do not start up the BigBlueButton components in the right order. To restart BigBlueButton, do the following:

    $ sudo bbb-conf --restart
    $ sudo bbb-conf --check

    If you don’t want FreeSWITCH to bind to, you need to figure out which IP address its using. First, determine the IP address FreeSWITCH is monitoring for incoming SIP calls with the following command:

    $ netstat -ant | grep 5060

    You should see an output such as

    tcp        0      0*               LISTEN

    In this example, FreeSWITCH is listening on IP address The IP address on your server will be different.

    Next, edit /usr/share/red5/webapps/sip/WEB-INF/bigbluebutton-sip.properties and set the value for sip.server.host to the IP address returned from the above command. Save the changes (you’ll need to edit the file as root to save changes).

    Restart BigBlueButton using the commands and run the built-in diagnostics checks.

    $ sudo bbb-conf --clean
    $ sudo bbb-conf --check

    Unable to connect using fs_cli

    As of BigBlueButton 2.2.18, the packaging now replaces the default ClueCon password for connecting to the FreeSWITCH command line interface (fs_cli) with a random password.

    (By default, FreeSWITCH only allowed unauthenticated connections from, but it’s still good security practice to not use default passwords).

    To connect to fs_cli, use the following command which supplies the password for authenticating.

    /opt/freeswitch/bin/fs_cli -p $(xmlstarlet sel -t -m 'configuration/settings/param[@name="password"]' -v @value /opt/freeswitch/etc/freeswitch/autoload_configs/event_socket.conf.xml)

    We also added /usr/local/bin/fs_clibbb with the contents

    /opt/freeswitch/bin/fs_cli -p $(xmlstarlet sel -t -m 'configuration/settings/param[@name="password"]' -v @value /opt/freeswitch/etc/freeswitch/autoload_configs/event_socket.conf.xml)

    that will let you type fs_clibbb at the command prompt to get into FreeSWITCH console.

    Echo test hangs upgrading BigBlueButton 2.2

    The install scripts now change the default CLI password for FreeSWITCH and the other parts of BigBlueButton need to use this new password. For a new installation, the install scripts will automatically set this new password.

    If you upgrade using bbb-install.sh, the script will update the FreeSWITCH password using sudo bbb-conf --setip <hostname>.

    If you upgraded using manual steps, be sure to do ao sudo bbb-conf --setip <hostname> to sync all the FreeSWITCH passwords.

    FreeSWITCH using default stun server

    For many years, in BigBlueButton’s FreeSWITCH configuration file /opt/freeswitch/etc/freeswitch/vars.xml, the default value for external_rtp_ip was stun.freeswitch.org

      <X-PRE-PROCESS cmd="set" data="external_rtp_ip=stun:stun.freeswitch.org"/>

    However, this is not a reliable choice for stun server. Recommend either changing it to your servers external IP address or setup your own stun/turn server. For example, if your server has an external IP at

      <X-PRE-PROCESS cmd="set" data="external_rtp_ip="/>

    You can add a line in /etc/bigbluebutton/bbb-conf/apply-conf.sh to always apply this value even if the FreeSWITCH package upgrades.

    xmlstarlet edit --inplace --update '//X-PRE-PROCESS[@cmd="set" and starts-with(@data, "external_rtp_ip=")]/@data' --value "external_rtp_ip=" /opt/freeswitch/conf/vars.xml

    Note: If your server has an internal/exteral IP address, such as on AWS EC2 server, be sure to set it to the external IP address configure a dummy network interface card (see Update FreeSWITCH).

    HTML5 Server

    bbb-html5 fails to start with a SETSCHEDULER error

    As of 2.2.31, the systemd unit file for bbb-html5.service now contains the following lines


    You can override this with creating the following directory

    mkdir /etc/systemd/system/bbb-html5.service.d

    and creating /etc/systemd/system/bbb-html5.service.d/override.conf with the following contents


    Then do systemctl daemon-reload and restart BigBlueButton.

    Installation and packages

    The following packages have unmet dependencies

    When installing the latest build of BigBlueButton, the package bbb-conf now uses yq to manage YAML files.

    You need to add the repository ppa:rmescandon/yq to your server. For steps on how to do this, see Update your server in the BigBlueButton 2.2 install guide.

    Alternatively, if you have not made any customizations to BigBlueButton (outside of using bbb-conf), you can use bbb-install.sh to install/upgrade to the latest version (the bbb-install.sh script will automatically install the repository for yq).

    If you’ve installed/uninstalled BigBlueButton packages, you may get a No Symbolic Link warning from bbb-conf --check:

    ** Potential Problems **
        nginx (conf): no symbolic link in /etc/nginx/sites-enabled for bigbluebutton

    To solve this, add a symbolic link to nginx for the BigBlueButton site:

    $ sudo ln -s /etc/nginx/sites-available/bigbluebutton /etc/nginx/sites-enabled/bigbluebutton
    $ sudo /etc/init.d/nginx restart

    Package install fails with sed error

    Some of the BigBlueButton packages use sed scripts to extract contents from configuration files. If the file does not exist at the time of the script’s execution, or the sed script matches multiple entries in a file (such as when a configuration line is commented out), you can see an error such as

    Setting up bbb-client (1:2.0.0-374) ...
    sed: -e expression #1, char 42: unterminated `s' command
    dpkg: error processing package bbb-client (--configure):
     subprocess installed post-installation script returned error exit status 1
    dpkg: dependency problems prevent configuration of bbb-config:
     bbb-config depends on bbb-client; however:
      Package bbb-client is not configured yet.
    dpkg: error processing package bbb-config (--configure):
     dependency problems - leaving unconfigured
    Errors were encountered while processing:
    E: Sub-process /usr/bin/dpkg returned an error code (1)

    In the above example, the /var/lib/dpkg/info/bbb-client.postinst failed to finish. To debug, edit this file and change the first line to read

    #!/bin/bash -ex

    and run

    $ sudo apt-get install -f

    You should now see each command in bbb-conf.postinst as it executes upto the line in which the error occurs. Post this output to https://groups.google.com/forum/#!forum/bigbluebutton-setup for help in resolving the issue.

    Errors with packages

    Some hosting providers do not provide a complete /etc/apt/source.list. If you are finding your are unable to install a package, try replacing your /etc/apt/sources.list with the following

    deb http://archive.ubuntu.com/ubuntu xenial main restricted universe multiverse
    deb http://archive.ubuntu.com/ubuntu xenial-updates main restricted universe multiverse
    deb http://security.ubuntu.com/ubuntu xenial-security main restricted universe multiverse

    then do

    $ sudo apt-get update

    and try installing BigBlueButton again from the beginning.

    WebRTC errors (1001, 1002,…)

    WebRTC offers very high-quality audio. However, the user’s network settings (or firewall) may not allow WebRTC to connect (or keep connected).

    Here are the following lists the possible WebRTC error messages that a user may encounter:

    • 1001: WebSocket disconnected - The WebSocket had connected successfully and has now disconnected. Possible Causes:
      • Loss of internet connection
      • Nginx restarting can cause this
    • 1002: Could not make a WebSocket connection - The initial WebSocket connection was unsuccessful. Possible Causes:
      • Firewall blocking ws protocol
      • Server is down or improperly configured
      • See potential solution here.
    • 1003: Browser version not supported - Browser doesn’t implement the necessary WebRTC API methods. Possible Causes:
      • Out of date browser
    • 1004: Failure on call - The call was attempted, but failed. Possible Causes:
      • For a full list of causes refer here
      • There are 24 different causes so I don’t really want to list all of them
      • Solution for this issue outlined here.
    • 1005: Call ended unexpectedly - The call was successful, but ended without user requesting to end the session. Possible Causes:
      • Unknown
    • 1006: Call timed out - The library took too long to try and connect the call. Possible Causes:
      • Previously caused by Firefox 33-beta on Mac. We’ve been unable to reproduce since release of FireFox 34
    • 1007: ICE negotiation failed - The browser and FreeSWITCH try to negotiate ports to use to stream the media and that negotiation failed. Possible Causes:
      • NAT is blocking the connection
      • Firewall is blocking the UDP connection/ports
    • 1008: Call transfer failed - A timeout while waiting for FreeSWITCH to transfer from the echo test to the real conference. This might be caused by a misconfiguration in FreeSWITCH, or there might be a media error and the DTMF command to transfer didn’t go through (In this case, the voice in the echo test probably didn’t work either.)
    • 1009: Could not fetch STUN/TURN server information - This indicates either a BigBlueButton bug (or you’re using an unsupported new client/old server combination), but could also happen due to a network interruption.
    • 1010: ICE negotiation timeout - After the call is accepted the client’s browser and the server try and negotiate a path for the audio data. In some network setups this negotiation takes an abnormally long time to fail and this timeout is set to avoid the client getting stuck.
    • 1020: Media cloud could not reach the server - See how to solve this here.


    Server running behind NAT

    The following issue might be helpful in debugging if you run into errors and your server is behind NAT.

    Could not get your microphone for a WebRTC call

    Chrome requires (As of Chrome 47) that to access the user’s microphone for WebRTC your site must be serving pages via HTTPS (that is, nginx is configured with a SSL certificate).

    If the user attempts to share their microphone and your BigBlueButton sever is not configured for SSL, Chrome will block access and BigBlueButton will report the following error

    WebRTC Audio Failure: Detected the following WebRTC issue: Could not get your microphone for a WebRTC call. Do you want to try flash instead?

    To enable Chrome to access the user’s microphone, see Configure HTTPS on BigBlueButton.

    The browser is not supported

    When you attempt to join a BigBlueButton session, the client looks for supported browsers before fully loading. The client gets its list of supported browsers from /usr/share/meteor/bundle/programs/server/assets/app/config/settings.yml. You can see the list of supported browsers at the bottom. For example,

    - browser: mobileSafari
        - 11
        - 1

    states that Mobile Safari version 11.1 or later is supported (notice the first letter is lower case and concatenated with the remainder of the browser name).

    To add a browser to the list, first open the following page https://test.bigbluebutton.org/html5client/useragent with the browser, which will print its useragent string. For example, with the Vivaldi browser you might see

    Vivaldi 2.8.1664 / Linux 0.0.0

    Next, to add this as a supported browser, append to settings.yml

    - browser: vivaldi
        - 2
        - 8

    save the updated settings.yml file, and then restart your BigBlueButton server with sudo bbb-conf --restart. Note any browser you add must support WebRTC libraries (not all do), so be sure to check it first with https://test.webrtc.org/.

    Tomcat shows “Cannot assign requested address on startup”

    If your server has multiple IP addresses, Tomcat might not pick the right address to bind. This could throw an error on installation when tomcat is attempting to install.

    Check /var/log/tomcat7/catalina.out for the following error

    Jan 30, 2018 9:17:37 AM org.apache.catalina.core.StandardServer await
    SEVERE: StandardServer.await: create[localhost:8005]:
    java.net.BindException: Cannot assign requested address (Bind failed)
     at java.net.PlainSocketImpl.socketBind(Native Method)

    If you see this, first ensure that there isn’t another copy of tomcat running by doing ps -aef | grep tomcat7. If you do see another copy running, try killing it and then restarting tomcat.

    If you still see the same error in catalina.out, then /etc/tomcat7/server.xml and change

    <Server port="8005" shutdown="SHUTDOWN">
    <Server address="" port="8005" shutdown="SHUTDOWN">

    Restart tomcat7 again and it should start normally.

    nginx not running

    The common reasons for nginx not running are inability to bind to port 80 and configuration errors. To check if port 80 is already in use, use

    $ sudo netstat -ant

    to see if any process is currently bound to port 80. If so, check to see if another web server is installed. If so, then stop the web server and try to restart nginx. One of the server requirements before you install BigBlueButton is that port 80 is not in use by another application (such as Apache). For details on why this is a requirements, see We recommend running BigBlueButton on port 80.

    If port 80 is free, check if your nginx configuration file has errors. Try a restart of nginx

    $ sudo systemctl restart nginx

    and look for the output of

       [ OK ]

    If you see [ Fail ], then your nginx configuration files might have a syntax error. Check the syntax of the nginx configuration files using the command

    $ sudo nginx -t

    and see if it reports any errors. You can also check the error.log file for nginx to see what errors it gives on startup

    $ sudo cat /var/log/nginx/error.log

    “Welcome to nginx”

    During installation of BigBlueButton the packaging scripts attempt to assign the correct IP address during setup. However, if the IP address changes (such as when rebooting a VM), or the first IP address was not the correct IP address for the server, you may see a “Welcome to nginx” page.

    To reconfigure the BigBlueButton to use the correct IP address or hostname, see BigBlueButton does not load.


    404 Error when loading the client

    BigBlueButton 2.2 requires Java 8 as the default Java. Recently, some Ubuntu 16.04 distributions have switched the default version of Java to Java 9 (or later).

    Use java -version to check that the default version of 1.8.0.

    ~/dev$ java -version
    openjdk version "1.8.0_242"
    OpenJDK Runtime Environment (build 1.8.0_242-8u242-b08-0ubuntu3~16.04-b08)
    OpenJDK 64-Bit Server VM (build 25.242-b08, mixed mode)

    If not, do the following

    sudo apt-get install openjdk-8-jre
    update-alternatives --config java  # Choose java-8 as default

    Run java -version and confirm it now shows the default as 1.8.0, and then restart BigBlueButton with sudo bbb-conf --restart

    Blank presentation area on create or upload

    If you join a meeting and the default presentation is not visible or your uploaded presentation doesn’t display, then this is most likely due to a permissions error. To solve this, ensure that /var/bigbluebutton/ is owned by bigbluebutton rather than root or any other account. See this issue for more explanation.

    Unable to create presentation

    If you see the following error in /var/log/bigbluebutton/bbb-web.log

      failed to map segment from shared object: Operation not permitted

    use the command mount to check that the /tmp director does not have noexec permissions (which would prevent executables from running in the /tmp directory). If you see noexec for /tmp, you need to remount the directory with permissions that enable processes (such as the slide conversion) to execute in the /tmp directory.

    Too many open files

    On servers with greater than 8 CPU cores, bbb-web log (/var/log/bigbluebutton/bbb-web.log) may throw an error of Too many open files

    Caused by: java.io.IOException: Too many open files

    To resolve, create an override file that increases the number of open files for bbb-web

    $  sudo mkdir -p /etc/systemd/system/bbb-web.service.d/
    $  sudo cat > /etc/systemd/system/bbb-web.service.d/override.conf << HERE
    $  sudo systemctl daemon-reload

    bbb-web takes a long time to startup

    bbb-web relies on the SecureRandom class (which uses available entropy) to provide random values for its session IDs. On a virtualized server, however, the available entropy can run low and cause bbb-web to block for a long period before it finishes it’s startup sequence (see Slow startup of tomcat).

    To provide bbb-web with more entropy, you can install haveged

    $ sudo apt-get install haveged

    For more information see How to Setup Additional Entropy for Cloud Servers Using Haveged.

    Error installing bbb-web

    If you get the following error during upgrade to BigBlueButton

    Unpacking bbb-web (1:2.2.0-67) over (1:2.2.0-66) ...
    dpkg: error processing archive /var/cache/apt/archives/bbb-web_1%3a2.2.0-67_amd64.deb (--unpack):
     trying to overwrite '/etc/bigbluebutton/nginx/web', which is also in package bbb-client 1:2.2.0-28
    dpkg-deb: error: subprocess paste was killed by signal (Broken pipe)
    Errors were encountered while processing:
    E: Sub-process /usr/bin/dpkg returned an error code (1)```

    Then first uninstall bbb-client

    $ sudo apt-get purge bbb-client

    and try installing BigBlueButton again.

    Other errors

    Root partition too small

    If the root partition on your BigBlueButton server is too small (for disk space requirements see Before you install), we recommend moving the following directories to an external partition with sufficient disk space.

    BigBlueButton processing and storage of recordings:

    Location of all media directories on disk available here.

    To make the move, we’ll first stop BigBlueButton, then move the above directories to a new location on the external partition, create symbolic links from the original locations to the new locations, and restart BigBlueButton.

    In the following example, the external partition is mounted on /mnt.

    $ sudo bbb-conf --stop
    $ sudo mv /var/freeswitch/meetings /mnt
    $ sudo ln -s /mnt/recordings /var/freeswitch/meetings
    $ sudo mv /usr/share/red5/webapps/video/streams /mnt
    $ sudo ln -s /mnt/streams /usr/share/red5/webapps/video/streams
    $ sudo /var/bigbluebutton /mnt
    $ sudo ln -s /mnt/bigbluebutton /var/bigbluebutton
    $ sudo bbb-conf --start

    BigBlueButton does not load

    If your has changed it’s network connection (such as on reboot), you can clean most of BigBlueButton’s configuration files with the following steps.

    $ sudo bbb-conf --setip <ip_address_or_hostname>
    $ sudo bbb-conf --clean
    $ sudo bbb-conf --check

    For more information see bbb-conf options.

    Running within an LXD Container

    LXD is a very powerful container system for Ubuntu lets you run full Ubuntu 16.04 servers within a container. Because you can easily clone and snapshot LXD containers, they are ideal for development and testing of BigBlueButton.

    However, if you install BigBlueButton within an LXD container, you will get the following error from sudo bbb-conf --check

    ** Potential problems described below **
    # Error: Unable to connect to the FreeSWITCH Event Socket Layer on port 8021

    You’ll also get an error from starting FreeSWITCH with bbb-conf --restart. When you try systemctl status freeswitch.service, you’ll see an error with SETSCHEDULER.

    $ sudo systemctl status freeswitch.service
    ● freeswitch.service - freeswitch
       Loaded: loaded (/lib/systemd/system/freeswitch.service; enabled; vendor preset: enabled)
       Active: inactive (dead) (Result: exit-code) since Wed 2017-04-26 16:34:24 UTC; 23h ago
      Process: 7038 ExecStart=/opt/freeswitch/bin/freeswitch -u freeswitch -g daemon -ncwait $DAEMON_OPTS (code=exited, status=214/SETSCHEDULER)
    Apr 26 16:34:24 big systemd[1]: Failed to start freeswitch.
    Apr 26 16:34:24 big systemd[1]: freeswitch.service: Unit entered failed state.
    Apr 26 16:34:24 big systemd[1]: freeswitch.service: Failed with result 'exit-code'.
    Apr 26 16:34:24 big systemd[1]: freeswitch.service: Service hold-off time over, scheduling restart.
    Apr 26 16:34:24 big systemd[1]: Stopped freeswitch.
    Apr 26 16:34:24 big systemd[1]: freeswitch.service: Start request repeated too quickly.
    Apr 26 16:34:24 big systemd[1]: Failed to start freeswitch.

    This error occurs because the default systemd unit script for FreeSWITCH tries to run with permissions not available to the LXD container. To run FreeSWITCH within an LXD container, edit /lib/systemd/system/freeswitch.service and replace with the following

    After=syslog.target network.target local-fs.target
    ExecStart=/opt/freeswitch/bin/freeswitch -u freeswitch -g daemon -ncwait $DAEMON_OPTS

    Then enter the following commands to load the new unit file and restart BigBlueButton.

    $ sudo systemctl daemon-reload
    $ sudo bbb-conf --restart

    You can run BigBlueButton within a LXD container.

    Unable to connect to redis

    The packages bbb-apps-akka, bbb-fsesl-akka, and bbb-transcode-akka are packaged by sbt, but they need to have redis-server running before they startup. If sudo bbb-conf --debug shows redis connection errors

    Sep 22 15:32:12 sv21 bbb-apps-akka[7804]: Exception in thread "main" io.lettuce.core.RedisConnectionException: Unable to connect to
    Sep 22 15:32:12 sv21 bbb-apps-akka[7804]: #011at io.lettuce.core.RedisConnectionException.create(RedisConnectionException.java:78)
    Sep 22 15:32:12 sv21 bbb-apps-akka[7804]: #011at io.lettuce.core.RedisConnectionException.create(RedisConnectionException.java:56)
    Sep 22 15:32:12 sv21 bbb-apps-akka[7804]: Caused by: io.netty.channel.AbstractChannel$AnnotatedConnectException: Connection refused: /
    Sep 22 15:32:12 sv21 bbb-apps-akka[7804]: Caused by: java.net.ConnectException: Connection refused
    Sep 22 15:32:12 sv21 bbb-fsesl-akka[7893]: Exception in thread "main" io.lettuce.core.RedisConnectionException: Unable to connect to
    Sep 22 15:32:12 sv21 bbb-fsesl-akka[7893]: #011at io.lettuce.core.RedisConnectionException.create(RedisConnectionException.java:78)
    Sep 22 15:32:12 sv21 bbb-fsesl-akka[7893]: #011at io.lettuce.core.RedisConnectionException.create(RedisConnectionException.java:56)
    Sep 22 15:32:12 sv21 bbb-fsesl-akka[7893]: Caused by: io.netty.channel.AbstractChannel$AnnotatedConnectException: Connection refused: /
    Sep 22 15:32:12 sv21 bbb-fsesl-akka[7893]: Caused by: java.net.ConnectException: Connection refused
    Sep 22 15:32:13 sv21 bbb-transcode-akka[8001]: Exception in thread "main" io.lettuce.core.RedisConnectionException: Unable to connect to
    Sep 22 15:32:13 sv21 bbb-transcode-akka[8001]: #011at io.lettuce.core.RedisConnectionException.create(RedisConnectionException.java:78)
    Sep 22 15:32:13 sv21 bbb-transcode-akka[8001]: #011at io.lettuce.core.RedisConnectionException.create(RedisConnectionException.java:56)
    Sep 22 15:32:13 sv21 bbb-transcode-akka[8001]: Caused by: io.netty.channel.AbstractChannel$AnnotatedConnectException: Connection refused: /
    Sep 22 15:32:13 sv21 bbb-transcode-akka[8001]: Caused by: java.net.ConnectException: Connection refused

    you can add overrides for these three packages to ensure they start after redis.server. Run the following script.

    mkdir -p /etc/systemd/system/bbb-apps-akka.service.d
    cat > /etc/systemd/system/bbb-apps-akka.service.d/override.conf <<HERE
    mkdir -p /etc/systemd/system/bbb-fsesl-akka.service.d
    cat > /etc/systemd/system/bbb-fsesl-akka.service.d/override.conf <<HERE
    mkdir -p /etc/systemd/system/bbb-transcode-akka.service.d
    cat > /etc/systemd/system/bbb-transcode-akka.service.d/override.conf <<HERE

    The script bbb-install now creates these overrides by default.

    Legacy errors

    Conference not found errors

    The command sudo bbb-conf --debug searches through the red5, tomcat7, and nginx logs looking for errors and exceptions. However, the messages such as

        -- ERRORS found in /usr/share/red5/log/* --
    /usr/share/red5/log/bigbluebutton.log:2015-05-02 13:50:37,681-04:00 [pool-17-thread-1] ERROR o.b.w.v.f.a.PopulateRoomCommand - Not XML: [Conference 78505 not found]

    are innocuous and can be ignored.